Description
Southbend Electric Pedestal Kettle New
- Very Good Condition
- Well Maintained
- Works Perfect
Model # KEPS-30 Volts 208 Serial # 82569-9FF-2958 Phase 1 Width 27 3/4" Hz 60 Depth KW 15 Height 63 1/2" Amp 72.2 Shipping Weight 250
This Southbend Electric Pedestal Kettle Is Brand new , was never hooked up
,was filled with water once ,that is the water mark you can see inside the bowl
, Hence you can buy this at a bargain
Stationary Kettle, electric, 30-gallon capacity, two-thirds jacket, thermostatic
control, 2" draw-off, counter balanced hinged cover, 316 s/s interior liner, s/s
exterior, pedestal base, 15 kw
SPECIFICATIONS:
Self-generating, electric, pedestal kettle, ASME Code stamped, National Board
Registered, c-CSA-us and NSF certified. A double wall kettle interior shall form
a steam jacket around the lower 2/3 of the kettle. The jacket enclosure shall
contain distilled water which is factory sealed. The bottom of the kettle shall
be of hemispherical design for superior heat circulation.
Pedestal base shall have four 7/16 of an inch holes evenly spaced for securing
unit to floor. Construction shall be all welded #4 finish stainless steel, type
304. The interior liner on 20, 30 and 40 gallon models shall be standard 316 for
high acid content cooking. The controls shall be integrally mounted and shall
include a power switch, thermostat, pilot light, low water light,
vacuum/pressure gauge, safety relief valve and low water shut off.
The kettle shall be standard with removable elements. Convenience features shall
include a 2” (50 mm) sanitary drawoff valvehinged counterbalanced, stainless
steel domed cover for 20, 30 and 40 gallon models and spring assist hinged
stainless steel domed cover for 60, 80 and 100 gallon models.
The kettle shall operate in a temperature range of 165°F to 285°F (74°C to
140°C) at a maximum pressure of 50 psi (345 kPa)
Click
Here For Manufacturer's Spec Sheet
 |
|
|
|
|
|
|
<
|