Hablamos
EspaƱol

THE ONE-STOP SHOP FOR CHEFS SINCE 1959

FREE SHIPPING + FREE RETURNS on Qualifying Orders Details
FREE SHIPPING + FREE RETURNS on Qualifying Orders Details

Hobart HCM-450 - Used Very Good Condition

Item # USD-HCM 450
This is field is required.
Sold
Available for Shipping
Store Pickup

Please contact us at 718-232-7044 if you are interested in this item. We may have similar items available.

Not Qualified for Free Shipping

    Hobart HCM-450 Used Excellent Condition

    • Well Maintained
    • Very Good Condition

       
    Model # HCM-450 Volt 200
    Serial # 803-099 Phase 3
    Total Width 38 7/8 " Amps 26.5
    Total Depth 22 1/4 " Hz 60
    Total Height 41 3/4 " HP 5
    Shipping Weight 350 Lb RPM 1140

     

    • Quick Facts
       
    • Cut, mix and blend in seconds
    • 45-quart bowl with pouring lip
    • Durable steel base
    • Five-minute timer
    • Bowl-tilt lever
    • See-through cover
    • 5-H.P. motor

     

    No matter how much product you need to cut down to size or knead together, the HCM450 Cutter Mixer is up to the task.

    The Hobart Cutter Mixer has a 45-quart bowl and 5-H.P. motor designed for the most demanding operations. Boasting 1,140 rpm, it enables consistent processing of a variety of products. Liquid product can be continuously added to the mix via the pour-through center shaft with the cover closed, and the wide, shallow bowl provides easy access.

    Easy to operate from start to clean.

    The HCM450 has simple Start and Stop switches that are completely sealed and washable for easy cleaning. A five-minute timer includes Jog, Run and Timed settings, with Jog and Run settings giving the operator flexibility for non-timed recipes. A counterbalanced clear Lexan bowl cover seals in liquid product without a rubber gasket while enabling the operator to monitor the mix. But what really makes the HCM450 easy to use is the 90-degree bowl tilt—you simply pour out your product. And that tilt also helps make cleaning a snap.

    Made for the long haul, the bowl, mixing baffle and support bar are stainless steel. The base is steel with a powder-coat finish.

    Cutter Mixer Chart
     

    Click Here for VCM Capacity Chart


    Click Here for Manufactures Cut Sheet

    For More Information Please Call Carlos on 718 232 7044

     


Shop More Hobart >

Hobart HCM-450 Used Excellent Condition

  • Well Maintained
  • Very Good Condition

     
Model # HCM-450 Volt 200
Serial # 803-099 Phase 3
Total Width 38 7/8 " Amps 26.5
Total Depth 22 1/4 " Hz 60
Total Height 41 3/4 " HP 5
Shipping Weight 350 Lb RPM 1140

 

  • Quick Facts
     
  • Cut, mix and blend in seconds
  • 45-quart bowl with pouring lip
  • Durable steel base
  • Five-minute timer
  • Bowl-tilt lever
  • See-through cover
  • 5-H.P. motor

 

No matter how much product you need to cut down to size or knead together, the HCM450 Cutter Mixer is up to the task.

The Hobart Cutter Mixer has a 45-quart bowl and 5-H.P. motor designed for the most demanding operations. Boasting 1,140 rpm, it enables consistent processing of a variety of products. Liquid product can be continuously added to the mix via the pour-through center shaft with the cover closed, and the wide, shallow bowl provides easy access.

Easy to operate from start to clean.

The HCM450 has simple Start and Stop switches that are completely sealed and washable for easy cleaning. A five-minute timer includes Jog, Run and Timed settings, with Jog and Run settings giving the operator flexibility for non-timed recipes. A counterbalanced clear Lexan bowl cover seals in liquid product without a rubber gasket while enabling the operator to monitor the mix. But what really makes the HCM450 easy to use is the 90-degree bowl tilt—you simply pour out your product. And that tilt also helps make cleaning a snap.

Made for the long haul, the bowl, mixing baffle and support bar are stainless steel. The base is steel with a powder-coat finish.

Cutter Mixer Chart
 

Click Here for VCM Capacity Chart


Click Here for Manufactures Cut Sheet

For More Information Please Call Carlos on 718 232 7044

 


Shop More Used Equipment We Have Sold >

Hobart HCM-450 - Used Very Good Condition
Average Customer Rating