Hablamos
EspaƱol

THE ONE-STOP SHOP FOR CHEFS SINCE 1959

FREE SHIPPING + FREE RETURNS on Qualifying Orders Details
FREE SHIPPING + FREE RETURNS on Qualifying Orders Details

Stainless Handles for Raising & Lowering Fryer Screen, Replaces Belshaw Adamatic 616-0007C - Pack of 2

Item # DH8
Price: $109.50
This is field is required.
In Stock
Available for Shipping
Store Pickup

Ships within 1 Business Day

Free Shipping

    For effective use of this handle, squeeze it before inserting in the holes of the fryer screen, then stop squeezing for the notches of the handle to catch onto and hold the mesh wires of the screen. Squeeze again and pull out to remove the handle from the screen.
    • Handle with notch on each side for gripping fryer screen by the mesh wires
    • Fits any handleless deep-fat-fryer screen
    • Eliminates need for non-detachable screen handles
    • Makes it easy to lower the screen into and lift it out of the fryer
    Handle consists of a stainless steel spring that is wound around and welded at its two ends to a single stainless steel wire, which twists to form two wires that crisscross, each wire then bending and continuing straight until the end.
    7/16 inch from each tip is a notch that grabs the mesh wires of the fryer screen.

    Spring is 4 inch wide and coiled into circles measuring 1-3/8 inch in diameter.

    Wire is 1/8 inch thick.
    Wire of spring is between 1/16 inch and 1/8 inch thick.
    Overall size of each handle (counting the spring) is 5 inch x 15-3/4 inch x 1-3/8 inch high.

Show More

Frequently Bought Together

Choose at least one product.

For effective use of this handle, squeeze it before inserting in the holes of the fryer screen, then stop squeezing for the notches of the handle to catch onto and hold the mesh wires of the screen. Squeeze again and pull out to remove the handle from the screen.

  • Handle with notch on each side for gripping fryer screen by the mesh wires
  • Fits any handleless deep-fat-fryer screen
  • Eliminates need for non-detachable screen handles
  • Makes it easy to lower the screen into and lift it out of the fryer
Handle consists of a stainless steel spring that is wound around and welded at its two ends to a single stainless steel wire, which twists to form two wires that crisscross, each wire then bending and continuing straight until the end.
7/16 inch from each tip is a notch that grabs the mesh wires of the fryer screen.

Spring is 4 inch wide and coiled into circles measuring 1-3/8 inch in diameter.

Wire is 1/8 inch thick.
Wire of spring is between 1/16 inch and 1/8 inch thick.
Overall size of each handle (counting the spring) is 5 inch x 15-3/4 inch x 1-3/8 inch high.

Features
Material Stainless steel
Dimensions and Weights
Diameter 1.37"
Stainless Handles for Raising & Lowering Fryer Screen, Replaces Belshaw Adamatic 616-0007C - Pack of 2
Average Customer Rating
(2 reviews)
22
Not good quality I had to modify the slots to fit my screens and the tip ended up falling off after only 5 uses.
By Sylvia P, Indiana on October 9, 2020
Well built and some small adjustment needed The steel built feels like it should last much longer then previous handles.

We had to grind out the screen slots as they were just a fraction to small.

By Dan Morris, Oregon on September 11, 2017