UPC: 8029248284760
Description
The two identical molds in this set are each the PL10 Linear mold, and the set comes with a polycarbonate tray.
With the Pavogel mold you can make ice cream pops on a stick.The stick (50 included) is inserted (under the ice cream cavity) in a slot whose section (integrated with the mold) is hinged. The two parts that connect at the hinge fit together by projections in one part and holes in the other.
The hinge makes the extraction of the ice cream or ices both clean and effortless, since you lift the ice cream straight out by the stick. That way the food and your fingers don't touch each other.
Pavogel mold procedure
- Fill the Pavogel cavities with the ice cream or ices preparation.
- Insert each wooden stick in its slot.
- Level the ice cream.
- Slide the mold with its filled cavities in a blast chiller and freeze for 90 minutes.
- Open the hinge and take out the ice cream by the stick.
Volume each cavity 0.8 oz (25ml).
Overall size of each mold 4-5/16 inch x 7-9/16 inch x 7/8 inch high (110mm x 192mm x 22mm high).
Size of polycarbonate tray 4-9/16" x 15-1/2" x 7/16" high (116mm x 394mm x 11mm high).
Each wooden stick 3/8 inch x 2-15/16 inch (10mm x 75mm).
- Firm but bendable silicone made to withstand -40 to 536 Fahrenheit (-40 to 280 Celsius)
- Innovational hinged compartment for ice cream sticks to enable removal of ice cream without touching it
- Polycarbonate tray included
- 50 wooden sticks enclosed
Specifications
| Features | |
|---|---|
| Material | Silicone |
| Cavities | 10 |
| Dishwasher Safe | Yes |
| Maximum Heat Resistance | 536° F |
| Oven Safe | Yes |
| Shape | Rectangle |
| Dimensions and Weight | |
| Ounce Capacity | 0.8 |
