Hablamos
EspaƱol

THE ONE-STOP SHOP FOR CHEFS SINCE 1959

$15 OFF ORDERS OF $99 with Code: CYWK Details

Silikomart "L'italiano" Kit for Ice Pop Molds

Item # ITALIANOMFR: 25.365.99.0065UPC: 8051085251018
Price: $75.10

Notify me when this
product is back in stock
Temporarily Out of Stock
Available for Shipping
Store Pickup
Free Shipping

    Silikomart "L'italiano" Kit for Ice Pop Molds

    For molding ice cream or ices
    with inner and outer layers,
    this set is all you need.


    Components:

    1. 1 small green six-cavity silicone mold for inner ice-pop layer
      Size each cavity 1.5" x 3.6" x 0.5" high; volume each cavity 1.2 oz
    2. 1 large blue six-cavity silicone mold for outer ice-pop layer
      Size each cavity 2.2" x 4.1" x 0.9" high; volume each cavity 3.3 oz
    3. 1 plastic stand with six narrow slots on one side and six wide slots on opposite side
      Narrow slots for small green ice-pop molds
      Wide slots for large blue ice-pop molds
    4. 100 wooden sticks
    5. 1 plastic support with twelve silicone holders for wooden sticks
      Six blue holders to match blue mold
      Six green holders to match green mold
      Instructions:
    1. Insert small green mold in narrow slots of plastic stand.
    2. Fill small green mold with first ice-pop liquid.
    3. Insert wooden stick (100 included in kit) into each green silicone holder of stick support.
    4. Place stick support above the ice-pop stand (sticks lining up with green holders) and lower support until its feet rest on ice-pop stand's handles.
    5. Freeze ice-pop liquid into ices / ice cream.
    6. Remove frozen pops first from stick support, then from silicone mold.
    7. Turn the stick support upside down. Insert the frozen pops in the blue-silicone holders.
    8. Turn over plastic stand, with wide slots facing up. Insert large blue silicone mold.
    9. Fill blue mold with second ice-pop liquid.
    10. Turn over stick support together with frozen pops and immerse them in liquid-filled cavities of blue mold.
    11. Freeze and remove again. Finished ice pop has inner and outer layers.
    Silicone temperature resistance -76F to 446F (-60C to 230C)

    Pictorial Instructions (PDF)


Shop More Silikomart >

Silikomart "L'italiano" Kit for Ice Pop Molds

For molding ice cream or ices
with inner and outer layers,
this set is all you need.


Components:

  1. 1 small green six-cavity silicone mold for inner ice-pop layer
    Size each cavity 1.5" x 3.6" x 0.5" high; volume each cavity 1.2 oz
  2. 1 large blue six-cavity silicone mold for outer ice-pop layer
    Size each cavity 2.2" x 4.1" x 0.9" high; volume each cavity 3.3 oz
  3. 1 plastic stand with six narrow slots on one side and six wide slots on opposite side
    Narrow slots for small green ice-pop molds
    Wide slots for large blue ice-pop molds
  4. 100 wooden sticks
  5. 1 plastic support with twelve silicone holders for wooden sticks
    Six blue holders to match blue mold
    Six green holders to match green mold
    Instructions:
  1. Insert small green mold in narrow slots of plastic stand.
  2. Fill small green mold with first ice-pop liquid.
  3. Insert wooden stick (100 included in kit) into each green silicone holder of stick support.
  4. Place stick support above the ice-pop stand (sticks lining up with green holders) and lower support until its feet rest on ice-pop stand's handles.
  5. Freeze ice-pop liquid into ices / ice cream.
  6. Remove frozen pops first from stick support, then from silicone mold.
  7. Turn the stick support upside down. Insert the frozen pops in the blue-silicone holders.
  8. Turn over plastic stand, with wide slots facing up. Insert large blue silicone mold.
  9. Fill blue mold with second ice-pop liquid.
  10. Turn over stick support together with frozen pops and immerse them in liquid-filled cavities of blue mold.
  11. Freeze and remove again. Finished ice pop has inner and outer layers.
Silicone temperature resistance -76F to 446F (-60C to 230C)

Pictorial Instructions (PDF)


Shop More Silicone Ice Cream Molds >

Features
MaterialFood-grade plastic and silicone
Cavities6
Freezer SafeYes
ShapeRectangle
Silikomart L'italiano Kit for Ice Pop Molds
Average Customer Rating